Electro-Harmonix Crayon - Full Range Overdrive
- Brand: Electro-Harmonix
- Product Code: Electro-Harmonix Crayon - Full Range Overdrive
- Availability: 1
-
$77.10
Electro-Harmonix Crayon - Full Range Overdrive
The Crayon is a versatile overdrive with independent Bass and Treble controls and an open frequency range that provides players with a musical alternative to customary mid-focused overdrive pedals. It delivers a range of sounds going from a suggestion of dirt to full-on distortion and is equally impressive all by itself or when driving another overdrive pedal.
Quick Specs
- CONTROLS -
GAIN Knob – Controls the amount of input gain. As you turn GAIN clockwise, the overdrive ranges from just a touch of grit, in the fully counter-clockwise position, to classic distortion, in the fully clockwise setting.
TREBLE Knob – As you turn TREBLE clockwise, the overdrive’s high end is accentuated, making your tone brighter. Turn TREBLE counter-clockwise for a darker sound.
BASS Knob – As you turn BASS clockwise, the low end is boosted. Turn BASS counter-clockwise to reduce low end.
VOL Knob – Sets the output level of the Crayon. As VOL is turned clockwise, the output volume increases.
FOOTSWITCH and LED – The Footswitch selects whether the Crayon is engaged or in true-bypass mode. When the effect is engaged, the LED is lit.
INPUT Jack – This ¼” jack is the audio input for the Crayon. The input impedance is 315k Ohm.
AMP Jack – This ¼” jack is the audio output from the Crayon. The output impedance is 50 Ohm.
9V Power Jack – The Crayon can run off of a 9V battery or you can use an optional 9VDC AC Adapter capable of delivering at least 25mA to the 9V power jack, such as the Electro-Harmonix 9.6DC-200 power supply. The AC Adapter must have a center negative plug. The battery may be left in or taken out when using an AC Adapter. The Crayon has a current draw of 10mA at 9VDC.
- CHANGING THE BATTERY -
To change the 9V battery, remove the four screws on the bottom of the Crayon. Once the screws are removed, take off the bottom plate to change the battery. Please do not touch the circuit board while the bottom plate is off or you risk damaging a component.