Cusack - Screamer V3 - Overdrive

*THIS IS AN ONLINE ONLY ITEM. NOT AVAILABLE AT GUITAR PEDAL SHOPPE'S PLYMOUTH MA LOCATION OR MUSIC UNLIMITED KINGSTON MA LOCATION.*

20 years after the release of the Cusack Screamer V1, we present the Cusack Screamer V3. Unlike the previous version where different clipping modes were added, this pedal has no new features. Wait, what?

A little backstory.....

Jon Cusack founded Cusack Music with the simple goal of taking a true engineer's approach to guitar pedal design. Rather than get caught up in hype and mystical thinking, Jon wanted to design and build a pedal with parts and circuitry that would really bring your guitar's tone to life. Jon decided to start with a Tube Screamer circuit, to see if he could improve it. "There was a lot talk about metal film caps making a big difference in tone...and that didn't make sense to me." Jon Cusack decided to investigate. Grounded in the reality of physics and electrical principles, he built the Cusack Screamer V1 with ceramic capacitors. Now 20 years later, the V3 is being released with metal film capacitors, and it's great tone is.... well..... unchanged! 

  Now theoretically, there are a few hidden advantages of metal film capacitors that come with their added cost.  They are thought to be less microphonic (which may be a benefit at high gain levels), quieter, and their performance less impacted by temperature changes. They also handle power surges better, and as the new Screamer is able to run at 18V these caps are an added safety feature when running at higher voltages. However, under most circumstances the temperature ranges in which you would be performing a gig are well within the tolerances of the Screamers former ceramic capacitors. So to our ears, these unseen advantages are the only difference. 

 To signal this otherwise unseen change the V3 is finished in a new two step metallic powdercoat, and for the first time comes with standard milled aluminum knobs. 

THE PEDAL:

The Cusack Screamer is a “clean” overdrive, but has about twice the gain of a typical Tube Screamer. Many TS style pedals come off as “mid-rangey” or “muddy”, making them easy to get lost in a mix. This is where the Screamer offers much more clarity than a typical overdrive. It has been meticulously thought out, and tweaked for maximum tonal definition. You can actually hear the individual notes of complex chords that would normally be buried. Many players consider the Cusack Screamer to be the best option in a crowded field for good reason! The V3 now has metal film caps, but don't be fooled, we think it sounds the same. Can you hear a difference?

CONTROLS:
-Drive: Adjusts the amount of gain and overdrive.
-Tone: Controls the tonal balance. Left is a bassier tone, right is brighter
-Level: Sets the output level. 
-Toggle Switch: Left is classic silicon diodes. Middle is LED for a louder, punchier, brighter overdrive. The LED also lights up while playing! Right is Schottky diodes for a crushed, compressed tone. 

POWER:
-Standard center negative 9V DC power supply, or 9V battery (neither included)
-Current draw: ~6mA
-Safe to run at 18V DC, but will not alter the sound due to internal voltage regulator.