Cusack Cable Tester

Brand: Cusack
Product Code: Cusack Cable Tester
Reward Points: 79
In Stock
Price: $79.00 Price in reward points: 1580
Solderless cable has become very popular in recent years. The convenience of being able to
just screw a cable together is not without it’s downfall, however. Getting a nice solid
connection using the pins and set screws most brands use can be difficult. This causes a
resistance in the cable that works with the capacitance present in every cable to create a low
pass filter, rolling off your high end. Many people use a simple continuity tester to test
their cables. While a cable may test good in this manner, it may have excess resistance,
something the continuity tester is not checking. An ideal cable will have less than 1O between
it’s ends. One could use an ohmmeter to check the cable, but fumbling around with meter leads
can be tricky. The Cusack Music Cable Tester is the perfect device to make sure you have a
good cable.
Using the Cable Tester is simple. First, plug in power. Next, flip the switch to “Calibrate”,
and adjust the knob until the green LED turns off, then back until it just comes on. Flip the
switch back to “Use”, and you are ready to start testing cables. Plug each end of the cable
into the tester until it clicks once. This tests the tip of the cable. If the light stays on,
there is less than 1O, and you are good to go. Push one end of the cable down a second click,
and you are now checking the ring to tip connection. The LED should turn off. Plug the other
end in to the second click, and you are testing the ring connection. Repeat this for the third
click, which is the sleeve.
Small, easy to use, and handy to have, the Cusack Music Cable Tester is the perfect addition
to every musician and technicians toolset.

Write a review

Your Name:

Your Review: Note: HTML is not translated!

Rating: Bad            Good

Enter the code in the box below: